TRUCK WHEEL BALANCERS NEW- USED

RAVAGLIOLI, SNAP-ON, JOHN BEAN

 

 

                                       

 

 Back to Service Index     Back to Home  Return to wheel balancer page

Allstate's Of America, Inc. 2595 N.W. 37th. St. Miami, fl. 33142 800 223 2573,   305 635-4525  Fax 305 635-5353      e-mail    Bob@allstates.com                http://www.allstates.com

 

Allstates.com truck computer wheel balancer

$3,500.00

 

Late model, digital coats 6401 Truck wheel balancer. Original paint, used very little.

We also have one with dials instead of pushbuttons.

  

 

 

COATS 6200 HS TRUCK HAND SPIN WHEEL BALANCER

 

 

 HUNTER LARGE TRUCK SPINNER AND STROBE LIGHT IN STOCK.  4HP  and 5HP in stock.

AMERMACŪ TRUCK SPINNER AND STROBE BALANCER

220volt 3 phase 7.5 H.P.                            [Image]         Includes Strobe light

Rugged, built to last

Reconditioned

HunterŪ models  also in stock

Also Hunter and Bear Strobe Lights

Stewart Warner spinner and Strobe.

 

 

 

RAV model 118 ML computer wheel balancer. with optional adaptors, it is capable of balancing Truck, auto or motorcycle wheels.

Includes pneumatic wheel lift to raise and lower the wheel.

Weight is 400 pounds. (185 Kg.)

Capacity, rim diameter       10"  -  26"

Capacity, rim width             1.5" -  20"

Max. wheel weight           400 pounds  (200Kg.)

Read out accuracy             1 gram

Power                                 220 volt, 1 phase

Microprocessor controlled with self-calibration and self-diagnostics built in.

Specific balancing programs for static and aluminum wheels.

One single spin with low speed provides all the values.

Display readout of out of balance values and the related position on the wheel.

One control lever for spin, stop and lock the wheel.

Readout in grams or ounces.
  ONLY $5,800.00

 

 

SNAP-ON-TOOLS AUTO AND TRUCK COMPUTER WHEEL BALANCER.

EASY TO OPERATE. FAMOUS SNAP-ON QUALITY

HAND SPIN, NO MOTOR TO BURN OUT.

INCLUDES AUTO AND TRUCK ADAPTORS.

EASY TO GET PARTS AND SERVICE FROM S.0.

RAISE AND LOWER FOR EASE OF INSTALLING LARGE WHEELS. CRANK IT UP AND DOWN.

HANDLES UP TO 26" WHEELS

SET IN THREE DIALS OF INFORMATION, SPIN AND IT TELLS YOU HOW MUCH WEIGHT IS REQUIRED AND WHERE TO PUT IT.

 
 

 

 

TOP-OF-THE-LINE, JOHN BEAN MODEL 3.5 (SNAP-ON-TOOLS) COMPUTER WHEEL BALANCER FOR CARS AND TRUCKS.

SO EASY TO OPERATE.

HAND SPIN WITH INCREDIBLE ACCURACY.

HANDLES THE LARGEST WHEELS.

SNAP-ON SELLS ALL TYPES OF ADAPTORS TO FIT NEARLY ANY WHEEL.

SERVICE BY "EQUISERV" (SUN)

SMALL AND LARGER SIZE CONES ARE INCLUDED

 

ONLY $4,800.00
RIM DIAMETER RANGE   13 TO 26 INCHES  (330 TO 660MM)

RIM WIDTH RANGE:     4 TO 18 INCHES

RIM OFFSET RANGE:    3 TO 11 INCHES

MAX WHEEL DIAMETER: 50.5 INCHES  (1300MM)

MAX WHEEL WEIGHT:  500 LBS.  (227KG.)

POWER:   110/220/240 VOLT AND 50/60 HZ

CAN BE RUN OFF CAR BATTERY

WEIGHT:  229LBS. (104KG.)

 

BALANCING CYCLE: 8 TO 20 SECONDS

BALANCING MODES: TRUCK: NORMAL (CLIP-ON), 4ALU/MAG AND STATIC

CAR: NORMAL (CLIP-ON), 4 ALU/MAG AND STATIC

CONE SET FOR CARS AND TRUCKS

Sold