VAN NORMAN model 305H TRUCK DRUM LATHE Super heavy duty,
easily handles dual wheels. refurbished and works great. Standard truck adaptor
set included.
Price $5,500.00
AMMCO MODEL 6000 TRUCK LATHE. AMMCO MODEL TRUCK
DRUM LATHE. $7,800.00
VAN NORMAN MODEL 304 TRUCK DRUM LATHE. SUPER DUTY, DUAL
WHEELS, REFURBISHED. WITH ADAPTORS. $4,500.00
Allstate's
Of America, Inc. 2595 NW 37TH. ST. MIAMI, FLORIDA 33142 USA
800 223 2573, 305 635-4525 Fax 305
635-5353 e-mail Bob@allstates.com
http://www.allstates.com
 |
THIS AMMCO MODEL 6002 IS
IDENTICAL TO THE MODEL 6000 EXCEPT IT DOES NOT HAVE THE OPTIONAL LEFT SIDE
CROSS FEED AND SADDLE. IT WILL RESURFACE
DRUMS, ROTORS AND FLYWHEELS. INCLUDES A NICE SET OF ADAPTORS FOR LARGE SIZE
DRUMS AND ROTORS.
OPTIONAL MODEL 6200 DUAL FACING TOOL MAY BE ADDED LATER
ON FOR SURFACING BOTH SIDES OF LARGE ROTORS SIMULTANEOUSLY.
VERY NICE ORIGINAL CONDITION. HAS NOT BEEN USED VERY
MUCH.
INCLUDES THE VERY HEAVY DUTY GRINDER ATTACHMENT, AND A
SELECTION OF HEAVY DUTY ADAPTORS.
PRICED AT $ 7,800.00
FACTORY PRICE WAS $28,000.00 |
 |
 |
| OVERALL LATHE HEIGHT |
57" |
| SPINDLE TO FLOOR |
39" |
| TURNING TRAVEL |
18" |
| FACING TRAVEL |
7" |
| SPINDLE SPEED, VARIABLE |
20-140 RPM |
| FEED RATES, VARIABLE |
.0625IN./MIN. .750IN./MIN |
| HANDWHEEL GRADUATIONS |
.001" |
| MAXIMUM LOAD 2.5" ARBOR |
1500 LBS. |
| SPINDLE MOTOR |
1.5 HP 180 VDC |
| ELECTRICAL REQUIREMENTS |
220 VAC,
50-60HZ. 1PH. |
| LATHE WEIGHT |
1600LBS. |
|
 |
VAN NORMAN 305H DRUM LATHE FULLY
RECONDITIONED, BEAUTIFUL QUIET
$4,500.00 with adaptors
 |
TWO AVAILABLE. ONE INCLUDES THE ROTOR AND FLYWHEEL FACING ATTACHMENT SHOWN
ON THE LEFT SIDE OF THE LATHE. THIS ONE INCLUDES ADAPTORS AND IS PRICED AT
$5,500.00
THE OTHER DOES NOT HAVE THE FLYWHEEL OR ROTOR
ATTACHMENT AND IS PRICED AT $4,500.00
WE ALSO HAVE A MODEL 204 AVAILABLE, PRICED T $4,000.00 |
