Coats rim clamp, John Bean mag changer, Hunter tire changer, Coats 40-40 Used tire changer,
OVER 200 IN STOCK - Must sell need space, please call Motorcycle models in stock
| Back to Service Index | Back to Home | Contact Allstates | CLICK TO SEE MOTORCYCLE CHANGER AND BALANCER |
|
set of 4 33 inch tires from Jeep Wrangler only $200.00 good condition |
|
| CLICK TO SEE TRUCK TIRE CHANGERS |
| Allstate's Of America, Inc. 2595 N.W. 37th. St. Miami fl. 33142 USA 800 223 2573, 305 635-4525 Fax 305 635-5353 e-mail Bob@allstates.com http://www.allstates.com |
FMC JOHN BEAN® 8800AP "MAG"
Changer Heavy Duty for Chrome 
| Minimum Rim Diameter: 20.0" (254 mm)
Maximum Rim Width: 14.0" (356 mm) Maximum Tire diameter: 44.0" (1118 mm) Air Supply Operating Range 120-180 PSI Center Post Torque @ 150 PSI = 460 Ft. lbs. 550 ft. lbs. @ 180 PSI Bead Braking Force over 3000lbs. Shipping Weight 500lbs. (227 kg.) Size: 32" x 62" x 38" Special price, reconditioned $1,600.00 Actual photo This is a great machine, virtually trouble free, and very simple to operate. Service available through "Equiserv®", owned by Snap-On-tools Corp.® |
 |
||
|
|||
 |
 |
| New allstates 60-60 changer. 23" inside and 21" outside. Goes to 27" with optional adaptors and will do motorcycles and ATV'S with the same optional adaptors Large and heavy duty. Six feet tall. Shown with the optional adaptors. $2,000.00 adaptor set $200.00 |
 |
 |
 |
 |
 |
 |
 |
| Click to see Specifications of Coats® Tire changers |
|
|
||
|
 |
 |
 |
 |
 |
Table top clamping. This is an actual photo of a remanufactured
machine. Model 50-70 mag wheel changer
This is the same table used on the model 50-60 mag wheel changer |
 |
Coats®
50 60 AX remanufactured with Coats® "ROBO ARM" kit installed For the new larger size custom wheels click below to see more detailed photos 50-60 with ROBOARM kit $3,600.00 50-60AX with ROBOARM kit $4,000.00 |
| CLICK HERE TO SEE MORE INFORMATION AND PHOTOS ON THE "HELPER ARM" TIRE CHANGER | |
 |
 |
 |
|
| CLICK TO SEE MORE PHOTOS OF THIS HUGE CHANGER | |
 |
Reconditioned HOFFMAN mag wheel tire changer.
Priced at only $1,650.00 |
FMC® MODEL
20 5/8" REVERSIBLE (524 mm )
3" - 13" (76mm to 330 mm )
120 - 170 PSI ( 10 - 12 BAR )
700 + FT. LBS. (97 + KPG)
3300 LBS. (1479KG.)
30.5 CU. FT. ( 1.0 CU. m.)
620 LBS. (282 KG. ) |
 |
|
 |
| Hunter® TC3250 Mag style tire changer Beautifully reconditioned, looks like a new one. Does all the modern style tires and rims. Limited quantity in stock. $3,500.00 | |
 |
 |
![[Image]](pict88.jpg) |
Dual Power Fast and Effortless Two large air over cylinders provide maximum power, to handle almost any tire. Handles passenger car and light truck wheels. Rim diameter: 10.0 to 17" (254-455mm) Rim width: 3.0 to 19.75" (76 to 483mm) Air Supply (operating range) 120 to 180PSI (825 to 1238KPA) Cycle time: 6 seconds (complete forward and reverse stroke) Dimensions: 22" x 54.5" x 44" Shipping weight: 500lbs. Easy to operate and service. Uses 120 P.S.I. to 170 P.S.I. air supply. Refurbished $1,600.00 |
Factory authorized Hoffman distributors
| The Best in the world. Heavy duty. Truly reliable construction. Model
1550 New price $2,600.00 Dual clamping cylinders. Four jaw clamping chuck.
the self centering clamping jaws clamp up to 20" diameter from the inside,
and up to 18" from the outside. Powerful bead breaker, with over 5000 lbs.
of breaking power, and a range up to 13" wide. Innovative tire inflation system.
One large air jet is built into each movable jaw. Shipping weight is 507lb.
Bead breaker range is 2" to 13" Maximum rim width: 12.0"//305 mm
Electrical 115 volt, 50 or 60 hz. 1 phase Air supply required: 100psi to 175 psi
Optional motorcycle table and clamps |
 |
Coats® 40-40 and 40-40SA 40-50 tire changers. Reconditioned. $1,400.00, $1,400.00, $1,400.00
This is a very heavy duty, almost indestructible tire changer. Weight is 550 pounds. Extremely easy to operate. Thousands in use all over the world. Service available almost anywhere, if needed. Inflator is built in. Will handle all steel wheels and most aluminum wheels if special care is taken to protect the rims. However, this is not designed to be a changer for aluminum wheels.
| Click to see Specifications Coats® 40-40 |
| Coats® S34 Truck Tire Changer Refurbished. Very little use. Changes all truck tires from 15" through 28", tube type or tubeless with Electro-Hydraulic power. roller type tire spreader is standard equipment. Hydraulic wheel locking. Standard chuck system handles all wheels 15" through 28" Optional wheel chuck arms handle wheels up to 42". Hydraulic controls, valves and levers for each operating cylinder or motor. Heavy duty hydraulic motor with chain drive supported by Timken roller bearings. sufficient torque to remove all tires, including super-singles or off-highway tires. 22" x 84" L x 74" High. Weight 1,250lbs. Price new $9,900.00 Price reconditioned $ 5,500.00 |
| New allstate's Motorcycle changers in stock. Handle up to 21" wheel. $1,300.00 . |
 |
MOTORCYCLE WHEEL ADAPTOR
| Convert your rim clamp tire changer to work motorcycle wheels. Two models available. As small as 3" is possible. $500.00 and $695.00 Slips right on top. Clamps are fully adjustable for various sizes. Quality manufactured by "Hoffman". In stock. EZ CLAMP 1 AND 2 | ||
 |
 |
|