5 inch tube bender. Heavy duty pipe bender. Exhaust pipe bender. Tubing bender. truck exhaust pipe bender.

  Back to Service Index     Back to Home    Back to Muffler Page  

Allstate's Of America, Inc. 2595 NW 37TH. ST. MIAMI, FLORIDA 33142     800 223 2573,   305 635-4525  Fax 305 635-5353      e-mail    Bob@allstates.com                http://www.allstates.com

 

MACHINE BY-PRODUCT DESCRIPTION

  MODEL 214-MHDS


Click for Larger View

  THE MODEL 214-MHDS IS A HEAVY DUTY PIPE BENDER. IT CAN BEND PIPE SIZES UP TO 5" DIAMETER (127MM) X 1/2 WALL THICKNESS (12.7MM). IT CAN BEND FROM 4" - 11" RADII (101.6MM TO 279.4MM). IT GENERATES UP TO 280 TONS OF BENDING FORCES. THIS UNIT IS A COMPRESSION BENDER BUT BECAUSE OF THE RADII AND WALL THICKNESS THE BENDS ARE THE QUALITY OF MANDREL TYPE BENDERS. TOOLING CHANGEOVER TIME ABOUT 5 MINUTES. MANUAL BEND CONTROL WITH PRECISION BEND READOUT MAXIMUM DEGREE OF BEND IS 125. THIS UNIT IS IDEAL FOR POWER PLANTS, PIPE LINES HIGH PRESSURE HYDRAULIC LINES, SHIP BUILDING AND MOST MARKETS WHERE HEAVY WALL PIPE IS USED. THIS UNIT IS SELF CONTAINED AND CAN BE MOVED FROM SIGHT TO SIGHT.
FEATURES SPECIFICATIONS

  • HEAVY DUTY COMPRESSION PIPE BENDER
  • 230 - 440 VOLTS, 3 PHASE, 50-60 CYCLE
  • 45 HP ELECTRICAL MOTOR
  • VARIABLE SPEED PISTON HYDRAULIC PUMP
  • 5000 PSI MAXIMUM HYDRAULIC SYSTEM PRESSURE
  • 283 TONS OF BENDING FORCES
  • MANUAL BEND CONTROL CYCLE
  • 120 MAXIMUM BEND DEGREE
  • 8" (203.2MM) MINIMUM BEND RADII
  • 12" (304.8MM) MAXIMUM BEND RADII
  • 4" (101.6MM) O.D. DIAMETER X 5/8" (15.9MM) WALL THICKNESS MAXIMUM BEND CAPACITY
  • BEND QUALITY VERY NEAR MANDREL BENDS
  • APPROX 35 SECONDS PER 90 BEND
  • MACHINE PORTABLE AND CAN BE MOVED WITH FORKLIFT